This is a simple short and easy tutorial for NRF24L01 Transmitter Receiver. The nRF24L01 is a highly integrated, ultra low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM band.
- 2 PCS NRF24L01+2.4 GHz Wireless Transceiver module
- 2 Arduino any (here we used Arduino Mega 2560 )
- Male to. female jumpers.
Connect the following pins to your Arduino:as shown in figure
- Pin 9 - CE
- Pin 10 - CS(N)
- Pin 51 - MOSI
- Pin 50 - MISO
- Pin 52 - SCK
- 5v - 5v
- GND - GND