Burglar Alarm DIY Kits (Not Soldered)

₹155.00
Tax included

Burglar Alarm is basically a security alarm, which detects thief when they enters our home. For detecting, we use IR transmitter and Receiver. IR Sensor continuously takes the value, when interrupt occurs it will shows the variation.

Pratheesh V Nair (pratheesh@tachlog.com)

Please note that  DIY kit is not a project and a commercial product . It's a simple science project to learn Electronic circuit.
  • Secure payment with 128 Bit Encrypted data transfer between your browser and web server. Secure payment with 128 Bit Encrypted data transfer between your browser and web server.
  • Orders are processed in 1-2 Days and we try to deliver it within 6-7 Days. Orders are processed in 1-2 Days and we try to deliver it within 6-7 Days.
  • Troncart offers a 14 days return policy. Troncart offers a 14 days return policy.

IR sensor is directly connected to LM311 IC. It is a voltage comparator IC, here it is we used for reference voltage.Whenever the IR signal is interrupted, its output in receiver feed to LM311. and IC2 is triggered at pin 2 through transistor LM311. IC2 NE555 work as in the monostable multivibrator mode. We can adjust the time period through R7 & C2. The output of monostable directly connected to clock of the D-flipflop. In D-flipflop when input data is high then output is also high. Here we input pin of the D-flip flop connected to +5v(Always high). As a result when clock signal appear, a high voltage(+5v) is feed to the base of the  transistor BC547 & LED. Buzzer is connected to transistor collector and VCC. When Transistor ON Buzzer will produce sound. Finally a thief interrupt the IR signal simultaneously a buzzer sound will produce.

TLPN0071
5 Items
1